RIDAT - Ancillaries

Sheet Extruder (SE)

Tom Kaneko — Fri, 13 May 2011 16:55:49 +0000

Wide range of machines offering sheets in widths of 500 mm to 1500mm and thickness from 0.3mm to 8mm.
Multilayer sheets can be produced using co-extrusion option.

Optional features include:

65SE

Manufacturing sheets and rolls of:

Tom Kaneko — Fri, 13 May 2011 16:52:40 +0000

Production steps are as follows:

Pre-formed blisters are placed in in-expensive jigs
Products are laid inside the blisters
Adhesive coated card is placed on top and positioned by spring loaded pins
The assembly is then moved to the heating station where the backing card is sealed to the blister
While this is taking place the other stations are being unloaded and reloaded
This process can be manual or fully automated

Key machine features include:

Optional features include:

1518BSP

1012BSP

Typical Applications

Tom Kaneko — Fri, 13 May 2011 16:47:04 +0000

Production steps are as follows:

Formed sheet is placed upside down on a cutting mould
Board is placed on top and the sandwich is fed through the press
A pair of pressure rollers causes the sandwich to press against the steel rule knife within the cutting mould thereby individualising the material

Key machine features include:

406RCP

Applications