The RIDAT AFCS-P series are the most advanced in our range of thermoforming machines. It provides for flexibility of operation with inexpensive production.

Robust and reliable machine designed for medium scale thermoforming production requirements. It is equipped with the state-of-art electric control to provide guaranteed high quality production with use.

It generally accepts tooling used in machinery of other manufacturers.

Balanced heating is provided by two pitch pre-heat using upper and lower heaters which are individually operated. Ceramic heating elements are used and these are suitably zones for control and monitor by the microprocessor to suit individual product requirements.

Material transport by spiked chains. Its movement is driven by a.c. servo-motor. Adjustment of the transport width for varying material width can be readily done; with parallel assured by use of compensating chains.

Forming operation is designed for male, female or male / female moulding techniques supported by compressed air for high definition. Both the upper and lower platens are pneumatically actuated with toggle action. Provision has been made for quick tool changes and inclusion of plugging facility.

Trimming operation is achieved with in-expensive steel rule punch press which is equipped with moveable upper and lower platen and its motion is motorised. The unit can be moved both longitudinally and cross direction using adjustment mechanism.

Stacking operation The punched-out components are counted and stacked upwards into a magazine. Provision for auto push out, on a pre-set count, is provided.

Rewind facility to wind the skeletal waste is provided as standard. The push out is effected pneumatically by operating a hand lever.

Optional extras Material Roll Lift Pre-heat oven chamber Reservoir.